Kohler Graze Kitchen Faucet Review: Worth It? (November 2026)
Buy the Kohler Graze if you want a distinctive industrial-look pull-down with three spray modes and a 1.5 gpm flow rate. Its Sweep spray and Docknetik docking set it apart, but the three-hole mount and center lever narrow who can fit it.
On this page (9 sections)
The Kohler Graze is worth buying if you want a pull-down faucet with real spray variety and have a three-hole sink to mount it on. The three-function sprayhead and Docknetik docking are the reasons to pick it; the three-hole requirement and center lever are the reasons to look elsewhere.
Its design draws on the steel and railroad era, so it reads as a statement piece rather than a quiet background fixture. This Kohler Graze kitchen faucet review weighs what the specs mean at the sink, who should skip it and which alternatives fit better.
The Kohler Graze at a glance
The Graze is a deck-mounted pull-down faucet with a 1.5 gpm flow, a single lever in the center and a Vibrant Stainless finish. It brings three spray settings and a docking system that pulls the head back into the spout.
Kohler K-22063-VS Kohler K-22063 Graze 1.5 GPM: Best for three spray modes
- Three-function pull-down sprayhead
- Sweep spray and BerrySoft spray
- Docknetik docking system
- 1.5 gpm flow rate
- Vibrant Stainless finish
A bold statement faucet with three spray modes and a sprayhead that glides back into the spout. Best for a three-hole sink with a lever in the middle.
Pros
- Three spray modes cover everyday rinsing and heavy cleaning
- Docknetik locks the sprayhead back into the spout
- ProMotion lets the sprayhead swivel for easier reach
- Kohler backs it with a lifetime limited warranty
Cons
- Needs a three-hole sink
- Center lever won't suit every layout
- Lower 1.5 gpm flow than many rivals
The industrial silhouette is the first thing most people notice. Under that, the practical story is the sprayhead: a stream for filling, a wide blade for cleaning and a soft spray for delicate work.
The build uses an alloy steel body with a zinc lever handle. Kohler covers it with a lifetime limited warranty, which matters more on a faucet you plan to keep through a kitchen remodel.
The model number is K-22063-VS, and it ships as a single item with one handle. That single lever controls both temperature and flow, so the center position is the only control point on the deck.
The faucet is sold as advertised with no deck plate, which is worth knowing before you order.
Who the Graze suits and who should skip it
Buy it if you fill pots and wash dishes at the same sink and want a quick switch between a hard stream and a wide sweep. Cooks who rinse produce and wash by hand get the most from the BerrySoft setting.
Buy it if your sink already has three holes and the lever sits in the middle, because that is the mounting it expects. It also suits anyone drawn to the industrial look and willing to pay the premium tier for it.
Skip it if you have a one-hole sink and no deck plate, since the Graze won't cover the extra holes. Skip it too if you want a side-mounted lever or a higher flow rate for fast pot filling.
Renters should think twice as well. A three-hole requirement makes swapping back at move-out more work, so confirm the sink drilling before committing.
It also suits households where one sink does both prep and cleanup. The three modes let one person switch from rinsing vegetables to scrubbing a pan without changing tools.
Skip it if you mostly fill pitchers and pots and rarely use a spray, since the extra modes would go unused.
The specs that matter in daily use
The three-function sprayhead is the core feature, and it changes how you work through a sink of dishes. Stream fills and rinses; Sweep spray sends a wide, powerful blade across dishes and the basin; BerrySoft is the light setting for hands, delicate dishware and prepping fruit and vegetables.
Docknetik is Kohler's secure docking system inside the spout. The sprayhead glides back and locks into place, so it doesn't hang loose over the sink between uses.
ProMotion lets the pull-down head swivel for more comfortable reach into corners and around large pots.
The 1.5 gpm flow rate is on the lower side. That's fine for everyday washing and gentler on water use, but filling a stockpot takes longer than with a 1.8 gpm faucet.
The center lever is a one-hand control, and the Vibrant Stainless finish is a polished stainless look. Check that the finish coordinates with your sink and appliances before ordering, since the whole point of this faucet is how it looks.
The pull-down sprayer is the feature that ties the rest together. It lets you move the head to the dishes rather than moving dishes to the stream, and the swivel adds reach when the sink is crowded.
The lighter 16-ounce weight also means the head is easy to guide by hand.
Fitting it to your sink and counter
Check three things before you buy: hole count, lever placement and clearance under the cabinets. The Graze needs three holes and mounts on the deck, so a one-hole sink is the wrong starting point.
The center lever means the handle sits in the middle rather than off to the side. That's comfortable for many layouts but awkward if your sink is against a wall or under a low window.
Measure the space around the sink for the pull-down head and its swing. The spout needs room to move, and the handle needs clearance to lift and turn.
If you're swapping out an old faucet yourself, our guide on how to remove a kitchen faucet covers shutting off the water and disconnecting the lines. Then follow how to replace a kitchen faucet for the install sequence.
Check the supply lines and shut-off valves while the old faucet is out. Replacing worn valves then is easier than pulling everything apart again later.
The three-hole layout is the detail that decides most installs. Measure the spacing between the drillings and compare it with the faucet base before you order.
If the holes are too far apart or too close, the base won't sit flat and the install stalls.
Setup and first checks
Installation is a deck-mount job for a three-hole sink, so plan an afternoon and have a basin wrench and plumber's tape ready. Follow Kohler's instructions for the exact order of fittings and washers.
Seat the faucet so the base sits flat and the handle moves freely. Tighten the mounting hardware enough to stop wobble without crushing the seal.
Connect the hot and cold supply lines and open the valves slowly. Run water through the spout and the sprayhead on each setting, then check under the sink for drips at every connection.
Test the pull-down action: the head should glide out, swivel and lock back into the spout cleanly. If it hangs or catches, recheck how the hose is routed under the counter.
Run the Sweep and BerrySoft sprays briefly to confirm the selector changes modes without sticking. A quick check now saves a callback later.
Pay attention to how the hose sits as the head retracts. A hose that twists or rubs will make the docking feel stiff over time.
Give it a gentle pull and release a few times to see that it returns smoothly on its own.
Care and everyday use
Wipe the finish with a soft cloth and mild soap, then dry it, to keep the Vibrant Stainless look clean. Avoid abrasive pads and harsh cleaners that can dull a polished finish.
The sprayhead settings do most of the cleaning work. Use Sweep spray on greasy pans and sink walls, and save BerrySoft for hands and fragile items so you don't blast them.
Clear mineral buildup from the sprayface if the flow starts to look uneven. A gentle soak in a mild descaling solution, following Kohler's care guidance, usually restores the pattern.
Check the docking point now and then for grit or film. Wiping the spout and sprayhead keeps the head locking in smoothly.
If a drip appears at the base or the lever feels stiff, note it early. The lifetime limited warranty is worth using rather than living with a leak.
The polished finish shows water spots more than a brushed or spot-free surface. A quick dry after each use keeps it looking its best.
The three modes also cut down on scrubbing, since Sweep spray does the heavy lifting on greasy film.
The trade-offs to know before buying
The three-hole requirement is the biggest limitation. Many modern sinks ship with one hole or a predrilled set that doesn't match, and a deck plate isn't included, so this faucet can't simply cover extra openings.
The center lever narrows the layout options too. If your sink sits tight against a wall, the handle can feel cramped compared with a side-mounted lever.
The 1.5 gpm flow is lower than the 1.8 gpm on the Kraus Oletto below. That's a modest difference day to day, but you'll notice it when filling large pots.
The Graze also sits in the premium price tier. If the three spray modes and the look aren't priorities, a simpler pull-down does the same core job for less.
The 1.5 gpm rate also means less water moving at once. On a wide Sweep setting the blade still covers ground well, but on stream the fill is slower.
That trade is easy to accept for rinsing and washing, harder if you cook with big pots often.
Weigh those against the features you actually use. Spray variety and secure docking are the reasons to choose it; the mounting is the reason to walk away.
Alternatives worth a look
Two other faucets cover the cases where the Graze doesn't fit. One is easier to install in a single hole, and the other brings a different finish and a magnetic dock.
Kraus Spot Free Pulldown (KPF-2820SFS)
The Kraus Oletto is the easier fit for a one-hole sink, with a 1.8 gpm flow and a spot-free stainless finish. It installs in a single hole and includes pre-attached water lines and mounting hardware.
Its dual-function sprayhead switches between aerated stream and a powerful spray. The Reach Technology hose and swivel adapter give the head a wide range of motion, and the 360-degree spout adds reach around the basin.
The soft rubber sprayer holes let you wipe away mineral buildup by hand. The spot-free finish helps keep water spots and fingerprints down, so it needs less wiping than a polished surface.
The brass body and ceramic cartridge back up the fit and finish. The lever has 90-degree forward rotation for tight spaces, and the whole kit includes pre-attached lines, a snap-on counterweight and mounting hardware.
It stands 16 5/8 inches tall with an 8 3/4 inch spout height and 8 7/8 inch reach.
Choose the Kraus if you have one hole or want the higher flow. Pick the Graze if three spray modes matter more than the simpler mounting.
Delta Nicoli Brushed Gold Kitchen Faucet
The Delta Nicoli brings a Champagne Bronze finish and magnetic docking in a single-hole design. It fits one hole, or three holes with the deck plate that's included.
Delta's MagnaTite docking uses a magnet to set the sprayhead into place and hold it there. Touch-Clean spray holes let you wipe away calcium and lime buildup with a finger.
The ceramic disc valve is rated by Delta for at least 500,000 uses, and the Brilliance finish is engineered for corrosion resistance. Delta backs it with a lifetime limited warranty.
The included deck plate is the practical difference. It lets the Nicoli cover a three-hole sink as well as a one-hole one, so it fits both layouts the Graze splits between.
The gasket seal also helps keep splashes from leaking under the base. At 6 pounds it is heavier than the Graze, and the brushed finish hides marks more easily than polished stainless.
Choose the Nicoli if you want the bronze look and magnetic docking. The Graze still wins on spray variety, with three modes to the Nicoli's stream and spray.
Verdict: is the Kohler Graze right for your kitchen?
The Kohler Graze is the pick when you have three holes and want three spray modes. Its Sweep and BerrySoft settings, Docknetik docking and ProMotion swivel make it more useful at the sink than a basic pull-down, and the industrial look gives the kitchen character.
Buy it if the three-hole layout is already in place and the center lever works for you. Skip it for a one-hole sink, or if you'd rather have a side lever and a 1.8 gpm flow.
For more options at every price tier, browse our roundup of the best kitchen faucets. If you're weighing brands before you commit, our comparison of kitchen faucet brands covers how Kohler, Moen and Delta differ on warranties and finishes.
Frequently asked questions
How many holes does the Kohler Graze need?
The Kohler Graze needs a three-hole sink. Its handle sits in the center position, so check your existing drillings before you buy.
A one-hole sink would need a deck plate, which this model doesn't include.
What spray modes does the Kohler Graze have?
It has three: stream for filling pots, Sweep spray for a wide blade of water across dishes and the sink, and BerrySoft for a light spray on hands, delicate dishware and produce. You switch between them at the sprayhead.
What is the flow rate of the Kohler Graze?
The Kohler Graze runs at 1.5 gpm. That is lower than the 1.8 gpm Kraus Oletto and typical kitchen faucets, so expect less water per minute and a slightly longer fill time for large pots.
Is the Kohler Graze worth it over a cheaper pull-down?
Choose the Graze when the three spray modes and its look matter to you. If you want a simpler single-hole faucet at a lower price tier, the Kraus Oletto fits more sinks and is easier to live with in a tight layout.
